US ISO 9809-3:2010

Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 3: Normalized steel cylinders

UGX 60,000/=


Abstract

This Uganda Standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at manufacture of refillable normalized or normalized and tempered seamless steel gas cylinders of water capacities from 0.5 l up to and including 150 l for compressed, liquefied and dissolved gases. This standard was PUBLISHED on 2014-10-15

Price UGX 60,000/=
Category CHEMICALS AND CONSUMER PRODUCTS STANDARDS
Status Compulsory
Format PDF
TC Infrastructure, Facilities and Operations (SC 2) under the Petroleum Standards Technical Committee (UNBS/TC 16).
ICS 23.020.35 Gas cylinders
Language English
Edition 1st Edition
Sales Rating    

Clients Who Bought This Standard also Bought:

US ISO 1998-2:1998

Petroleum industry - Terminology - Part 2: Properties and tests

US ISO 1998-3:1998

Petroleum industry - Terminology - Part 3: Exploration and produc ..

US ISO 1998-4:1998

Petroleum industry - Terminology - Part 4: Refining

US ISO 1998-5:1998

industry - Terminology - Part 5: Transport, storage, distribution

US ISO 1998-6:1998

Petroleum industry - Terminology - Part 6: Measurement

US ISO 11960:2014

Petroleum and natural gas industries - Steel pipes for use as cas ..

US ISO 11961:2008

Petroleum and natural gas industries - Steel drill pipe

US ISO 13533:2001

Petroleum and natural gas industries - Drilling and production eq ..

US ISO 14693:2003

Petroleum and natural gas industries - Drilling and wellservicing ..

US ISO 10407-2:2008

Petroleum and natural gas industries - Rotary drilling equipment ..

US ISO 13500:2008

Petroleum and natural gas industries - Drilling fluid materials - ..

US ISO 10414-1:2008

Petroleum and natural gas industries - Field testing of drilling ..

US ISO 10414-2:2011

Petroleum and natural gas industries - Field testing of drilling ..

US ISO 14998:2013

Petroleum and natural gas industries - Downhole equipment - Compl ..

US ISO 17078-1:2004

Petroleum and natural gas industries - Drilling and production eq ..

US ISO 17078-2:2007

Petroleum and natural gas industries - Drilling and production eq ..

US ISO 17078-3:2009

Petroleum and natural gas industries - Drilling and production eq ..

US ISO 28781:2010

Petroleum and natural gas industries - Drilling and production eq ..

US ISO 10423:2009

Petroleum and natural gas industries - Drilling and production eq ..

US ISO 13535:2000

Petroleum and natural gas industries - Drilling and production eq ..

US ISO 13534:2000

Petroleum and natural gas industries - Drilling and production eq ..

US ISO 14310:2008

Petroleum and natural gas industries - Downhole equipment - Packe ..

US ISO 13085:2014

Petroleum and natural gas industries - Aluminium alloy pipe for u ..

US ISO 15546:2011

Petroleum and natural gas industries - Aluminium alloy drill pipe

US ISO 20312:2011

Petroleum and natural gas industries - Design and operating limit ..

US ISO 27627:2014

Petroleum and natural gas industries - Aluminium alloy drill pipe ..

US ISO 10424-1:2004

Petroleum and natural gas industries - Rotary drilling equipment ..

US ISO 10424-2:2007

Petroleum and natural gas industries - Rotary drilling equipment ..

US ISO 10405:2000

Petroleum and natural gas industries - Care and use of casing and ..

US ISO 13678:2010

Petroleum and natural gas industries - Evaluation and testing of ..

US ISO 15463:2003

Petroleum and natural gas industries - Field inspection of new ca ..

US ISO 13679:2002

Petroleum and natural gas industries - Procedures for testing cas ..

US ISO 16070:2005

Petroleum and natural gas industries - Downhole equipment - Lock ..

US ISO 17078-4:2010

Petroleum and natural gas industries - Drilling and production eq ..

US ISO 21457:2010

Petroleum, petrochemical and natural gas industries - Materials s ..

US ISO 10416:2008

Petroleum and natural gas industries - Drilling fluids - Laborato ..

US ISO 13501:2011

Petroleum and natural gas industries - Drilling fluids - Processi ..

US ISO 13503-1:2011

Petroleum and natural gas industries - Completion fluids and mate ..

US ISO 13503-3:2005

Petroleum and natural gas industries - Completion fluids and mate ..

US ISO 13503-4:2006

Petroleum and natural gas industries - Completion fluids and mate ..

US ISO 13503-6:2014

Petroleum and natural gas industries - Completion fluids and mate ..

US ISO 13680:2010

Petroleum and natural gas industries - Corrosion- resistant alloy ..

US ISO 10427-1:2001

Petroleum and natural gas industries - Equipment for well cementi ..

US ISO 10427-2:2004

Petroleum and natural gas industries - Equipment for well cementi ..

US ISO 25457:2008

Petroleum, petrochemical and natural gas industries - Flare detai ..

US ISO 13705: 2012

Petroleum, petrochemical and natural gas industries - Fired heate ..

US ISO 13880:1999

Petroleum and natural gas industries -Content and drafting of a t ..

US ISO 15663-1:2000

Petroleum and natural gas industries -Life cycle costing -Part 1: ..

US ISO 15663-2:2001

Petroleum and natural gas industries -Life-cycle costing -Part 2: ..

US ISO 15663-3:2001

Petroleum and natural gas industries -Life-cycle costing -Part 3: ..

US ISO 20815:2008

Petroleum, petrochemical and natural gas industries - Production ..

US ISO 13879:2015

Petroleum and natural gas industries - Content and drafting of a ..

US ISO/TS 16901:2015

Guidance on performing risk assessment in the design of onshore L ..

US ISO 15544:2000

Petroleum and natural gas industries - Offshore production instal ..

US ISO 148-1:2009

Metallic materials - Charpy pendulum impact test - Part 1:Test me ..

US ISO 857-1: 1998

Welding and allied processes - Vocabulary - Part 1: Metal welding ..

US ISO 3183: 2012

Petroleum and natural gas industries - Steel pipe for pipeline tr ..

US ISO 4136: 2012

Destructive tests on welds in metallic materials - Transverse ten ..

US ISO 5173: 2009

Destructive tests on welds in metallic materials - Bend tests

US ISO 5178: 2001

Destructive tests on welds in metallic materials - Longitudinal t ..

US ISO 6406:2005

Gas cylinders - Seamless steel gas cylinders- Periodic inspection ..

US ISO 6507-1: 2005

Metallic materials - Vickers hardness test - Part 1: Test method

US ISO 6520-1:2007

Welding and allied processes - Classification of geometric imperf ..

US ISO 6947:2011

Welding and allied processes - Welding positions

US ISO 9015-1: 2001

Destructive tests on welds in metallic materials - Hardness testi ..

US ISO 9712: 2012

Non-destructive testing - Qualification and certification of NDT ..

US ISO 10431:1993

Petroleum and natural gas industries - Pumping units - Specificat ..

US ISO 10438-1:2007

Petroleum, petrochemical and natural gas industries - Lubrication ..

US ISO 10438-2:2007

Petroleum, petrochemical and natural gas industries - Lubrication ..

US ISO 10438-3:2007

Petroleum, petrochemical and natural gas industries - Lubrication ..

US ISO 10438-4:2007

Petroleum, petrochemical and natural gas industries - Lubrication ..

US ISO 10439-1:2015

Petroleum, petrochemical and natural gas industries - Axial and c ..

US ISO 10439-2:2015

Petroleum, chemical and gas service industries ? Axial and centri ..

US ISO 10439-3:2015

Petroleum, chemical and natural gas service industries - Axial an ..

US ISO 13588: 2012

Non-destructive testing of welds - Ultrasonic testing - Use of au ..

US ISO 13623: 2009

Petroleum and natural gas industries - Pipeline transportation sy ..

US ISO 13706:2011

Petroleum, petrochemical and natural gas industries - Air-cooled ..

US ISO 13707:2000

Petroleum and natural gas industries ? Reciprocating compressors

US ISO 13709:2009

Centrifugal pumps for petroleum, petrochemical and natural gas in ..

US ISO 13710: 2004

Petroleum, petrochemical and natural gas industries - Reciprocati ..

US ISO 13847: 2013

Petroleum and natural gas industries - Pipeline transportation sy ..

US ISO 14313:2007

Petroleum and natural gas industries - Pipeline transportation sy ..

US ISO 14732: 2013

Welding personnel - Qualification testing of welding operators an ..

US ISO 15136-1: 2009

Petroleum and natural gas industries -Progressing cavity pump sys ..

US ISO 15136-2: 2006

Petroleum and natural gas industries - Progressing cavity pump sy ..

US ISO 15589-1:2015

Petroleum and natural gas industries - Cathodic protection of pip ..

US ISO 15589-2:2012

Petroleum and natural gas industries - Cathodic protection of pip ..

US ISO 15590-1:2009

Petroleum and natural gas industries - Induction bends, fittings ..

US ISO 15590-2:2003

Petroleum and natural gas industries - Induction bends, fittings ..

US ISO 15590-3:2004

Petroleum and natural gas industries - Induction bends, fittings ..

US ISO 15609-1:2004

Specification and qualification of welding procedures for metalli ..

US ISO 15609-2: 2001

Specification and qualification of welding procedures for metalli ..

US ISO 15609-3: 2004

Specification and qualification of welding procedures for metalli ..

US ISO 15609-4: 2009

Specification and qualification of welding procedures for metalli ..

US ISO 15609-5: 2011

Specification and qualification of welding procedures for metalli ..

US ISO 15609-6: 2013

Specification and qualification of welding procedures for metalli ..

US ISO 16812:2007

Petroleum, petrochemical and natural gas industries - Shell and-t ..

US ISO 17636-1:2013

Non-destructive testing of welds - Radiographic testing - Part 1: ..

US ISO 17636-2:2013

Non-destructive testing of welds - Radiographic testing - Part 2: ..

US ISO 21809-1:2011

Petroleum and natural gas industries - External coatings for buri ..

US ISO 21809-2:2014

Petroleum and natural gas industries - External coatings for buri ..

US ISO 21809-3:2011

Petroleum and natural gas industries - External coatings for buri ..

US ISO 21809-4:2009

Petroleum and natural gas industries - External coatings for buri ..

US ISO 21809-5:2010

Petroleum and natural gas industries - External coatings for buri ..

US ISO 3993: 1984

Liquefied petroleum gas and light hydrocarbons - Determination of ..

US ISO 4512:2007

Petroleum and liquid petroleum products - Equipment for measureme ..

US ISO 4257: 2001

Liquefied petroleum gases - Method of sampling

US ISO 4256:1996

Liquefied petroleum gases - Determination of gauge vapour pressur ..

US ISO 4925:2005

Road vehicles - Specification of non-petroleum-base brake Fluids ..

US ISO 4706:2008

Gas cylinders - Refillable welded steel cylinders - Test pressure ..

US ISO 5145: 2014

Cylinder valve outlets for gases and gas mixtures - Selection and ..

US ISO 7507-1:2003

Petroleum and liquid petroleum products - Calibration of vertical ..

US ISO 7225:2005

Gas cylinders - Precautionary labels

US ISO 7507-2:2005

Petroleum and liquid petroleum products - Calibration of vertical ..

US ISO 7507-3:2006

Petroleum and liquid petroleum products - Calibration of vertical ..

US ISO 7507-4:1995

Petroleum and liquid petroleum products - Calibration of vertical ..

US ISO 7507-5:2000

Petroleum and liquid petroleum products - Calibration of vertical ..

US ISO/TR 7507-6:1997

Petroleum and liquid petroleum products - Calibration of vertical ..

US ISO 7866:2012

Gas cylinders - Refillable seamless aluminium alloy gas cylinders ..

US ISO 8819: 1993

Liquefied petroleum gases - Detection of hydrogen sulfide - Lead ..

US ISO 8973: 1997

Liquefied petroleum gases - Calculation method for density and va ..

US ISO 9809-1: 2010

Gas cylinders - Refillable seamless steel gas cylinders - Design, ..

US ISO 9809-2:2010

Gas cylinders - Refillable seamless steel gas cylinders -Design, ..

US ISO 9809-4:2014

Gas cylinders - Refillable seamless steel gas cylinders - Design, ..

US ISO 10156: 2010

Gases and gas mixtures - Determination of fire potential and oxid ..

US ISO 10461:2005

Gas cylinders - Seamless aluminium-alloy gas cylinders - Periodic ..

US ISO 10460: 2005

Gas cylinders - Welded carbon-steel gas cylinders - Periodic insp ..

US ISO 11114-2 :2012

Gas cylinders - Compatibility of cylinders and valve materials wi ..

US ISO 11119-1: 2012

Gas cylinders - Refillable composite gas cylinders and tubes - De ..

US ISO 11119-2: 2012

Gas cylinders - Refillable composite gas cylinders and tubes - De ..

US ISO 11119-3: 2013

Gas cylinders- Refillable composite gas cylinders and tubes Part ..

US ISO 11223:2004

Petroleum and liquid petroleum products - Direct static measureme ..

US ISO 11120:1999

Gas cylinders - Refillable seamless steel tubes of water capacity ..

US ISO 11621:1997

Gas cylinders - Procedures for change of gas service

US ISO 13341:2010

Gas cylinders - Fitting of valves to gas cylinders

US ISO 13758:1996

Liquefied petroleum gases - Assessment of the dryness of propane ..

US ISO 14245:2006

Gas cylinders - Specification and testing of LPG cylinder valves ..

US ISO 15403-1:2006

Natural gas - Natural gas for use as a compressed fuel for vehicl ..

US ISO 15169:2003

Petroleum and liquid petroleum products - Determination of volume ..

US 947-1:2011

Handling of petroleum products and their derivatives - Part 1: Si ..

US ISO 7-1:2007

Pipe threads where pressure-tight joints are made on the threads ..

US ISO 844:2007

Rigid cellular plastics - Determination of compression properties

US ISO 845:2006

Cellular plastics and rubbers - Determination of apparent density

US ISO 4590:2002

Rigid cellular plastics - Determination of the volume percentage ..

US ISO 1209-1:2007

Rigid cellular plastics - Determination of flexural properties - ..

US ISO 1209-2:2007

Rigid cellular plastics - Determination of flexural properties - ..

.....
Show Related Standards..