US ISO 10439-2:2015

Petroleum, chemical and gas service industries ? Axial and centrifugal compressors and expander compressors ? Part 2: Non- integrally geared centrifugal and axial compressors

UGX 90,000/=


Abstract

This Uganda Standard specifies minimum requirements and gives recommendations for axial compressors, single-shaft, and integrally geared process centrifugal compressors and expander-compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. This standard was PUBLISHED on 2015-12-15.

Price UGX 90,000/=
Category CHEMICALS AND CONSUMER PRODUCTS STANDARDS
Status Compulsory
Format PDF
TC UNBS/TC 16/SC 4-Petroleum Standards-Refining and transportation
ICS 71.120.99 Other equipment for the chemical industry 75.180.20 Processing equipment
Language English
Edition 1st Edition
Sales Rating    

Clients Who Bought This Standard also Bought:

US ISO 1998-2:1998

Petroleum industry - Terminology - Part 2: Properties and tests

US ISO 1998-3:1998

Petroleum industry - Terminology - Part 3: Exploration and produc ..

US ISO 1998-4:1998

Petroleum industry - Terminology - Part 4: Refining

US ISO 1998-5:1998

industry - Terminology - Part 5: Transport, storage, distribution

US ISO 1998-6:1998

Petroleum industry - Terminology - Part 6: Measurement

US ISO 11960:2014

Petroleum and natural gas industries - Steel pipes for use as cas ..

US ISO 11961:2008

Petroleum and natural gas industries - Steel drill pipe

US ISO 13533:2001

Petroleum and natural gas industries - Drilling and production eq ..

US ISO 14693:2003

Petroleum and natural gas industries - Drilling and wellservicing ..

US ISO 10407-2:2008

Petroleum and natural gas industries - Rotary drilling equipment ..

US ISO 13500:2008

Petroleum and natural gas industries - Drilling fluid materials - ..

US ISO 10414-1:2008

Petroleum and natural gas industries - Field testing of drilling ..

US ISO 10414-2:2011

Petroleum and natural gas industries - Field testing of drilling ..

US ISO 14998:2013

Petroleum and natural gas industries - Downhole equipment - Compl ..

US ISO 17078-1:2004

Petroleum and natural gas industries - Drilling and production eq ..

US ISO 17078-2:2007

Petroleum and natural gas industries - Drilling and production eq ..

US ISO 17078-3:2009

Petroleum and natural gas industries - Drilling and production eq ..

US ISO 28781:2010

Petroleum and natural gas industries - Drilling and production eq ..

US ISO 10423:2009

Petroleum and natural gas industries - Drilling and production eq ..

US ISO 13535:2000

Petroleum and natural gas industries - Drilling and production eq ..

US ISO 13534:2000

Petroleum and natural gas industries - Drilling and production eq ..

US ISO 14310:2008

Petroleum and natural gas industries - Downhole equipment - Packe ..

US ISO 13085:2014

Petroleum and natural gas industries - Aluminium alloy pipe for u ..

US ISO 15546:2011

Petroleum and natural gas industries - Aluminium alloy drill pipe

US ISO 20312:2011

Petroleum and natural gas industries - Design and operating limit ..

US ISO 27627:2014

Petroleum and natural gas industries - Aluminium alloy drill pipe ..

US ISO 10424-1:2004

Petroleum and natural gas industries - Rotary drilling equipment ..

US ISO 10424-2:2007

Petroleum and natural gas industries - Rotary drilling equipment ..

US ISO 10405:2000

Petroleum and natural gas industries - Care and use of casing and ..

US ISO 13678:2010

Petroleum and natural gas industries - Evaluation and testing of ..

US ISO 15463:2003

Petroleum and natural gas industries - Field inspection of new ca ..

US ISO 13679:2002

Petroleum and natural gas industries - Procedures for testing cas ..

US ISO 16070:2005

Petroleum and natural gas industries - Downhole equipment - Lock ..

US ISO 17078-4:2010

Petroleum and natural gas industries - Drilling and production eq ..

US ISO 21457:2010

Petroleum, petrochemical and natural gas industries - Materials s ..

US ISO 10416:2008

Petroleum and natural gas industries - Drilling fluids - Laborato ..

US ISO 13501:2011

Petroleum and natural gas industries - Drilling fluids - Processi ..

US ISO 13503-1:2011

Petroleum and natural gas industries - Completion fluids and mate ..

US ISO 13503-3:2005

Petroleum and natural gas industries - Completion fluids and mate ..

US ISO 13503-4:2006

Petroleum and natural gas industries - Completion fluids and mate ..

US ISO 13503-6:2014

Petroleum and natural gas industries - Completion fluids and mate ..

US ISO 13680:2010

Petroleum and natural gas industries - Corrosion- resistant alloy ..

US ISO 10427-1:2001

Petroleum and natural gas industries - Equipment for well cementi ..

US ISO 10427-2:2004

Petroleum and natural gas industries - Equipment for well cementi ..

US ISO 25457:2008

Petroleum, petrochemical and natural gas industries - Flare detai ..

US ISO 13705: 2012

Petroleum, petrochemical and natural gas industries - Fired heate ..

US ISO 13880:1999

Petroleum and natural gas industries -Content and drafting of a t ..

US ISO 15663-1:2000

Petroleum and natural gas industries -Life cycle costing -Part 1: ..

US ISO 15663-2:2001

Petroleum and natural gas industries -Life-cycle costing -Part 2: ..

US ISO 15663-3:2001

Petroleum and natural gas industries -Life-cycle costing -Part 3: ..

US ISO 20815:2008

Petroleum, petrochemical and natural gas industries - Production ..

US ISO 13879:2015

Petroleum and natural gas industries - Content and drafting of a ..

US ISO/TS 16901:2015

Guidance on performing risk assessment in the design of onshore L ..

US ISO 15544:2000

Petroleum and natural gas industries - Offshore production instal ..

US ISO 148-1:2009

Metallic materials - Charpy pendulum impact test - Part 1:Test me ..

US ISO 857-1: 1998

Welding and allied processes - Vocabulary - Part 1: Metal welding ..

US ISO 3183: 2012

Petroleum and natural gas industries - Steel pipe for pipeline tr ..

US ISO 4136: 2012

Destructive tests on welds in metallic materials - Transverse ten ..

US ISO 5173: 2009

Destructive tests on welds in metallic materials - Bend tests

US ISO 5178: 2001

Destructive tests on welds in metallic materials - Longitudinal t ..

US ISO 6406:2005

Gas cylinders - Seamless steel gas cylinders- Periodic inspection ..

US ISO 6507-1: 2005

Metallic materials - Vickers hardness test - Part 1: Test method

US ISO 6520-1:2007

Welding and allied processes - Classification of geometric imperf ..

US ISO 6947:2011

Welding and allied processes - Welding positions

US ISO 9015-1: 2001

Destructive tests on welds in metallic materials - Hardness testi ..

US ISO 9712: 2012

Non-destructive testing - Qualification and certification of NDT ..

US ISO 10431:1993

Petroleum and natural gas industries - Pumping units - Specificat ..

US ISO 10438-1:2007

Petroleum, petrochemical and natural gas industries - Lubrication ..

US ISO 10438-2:2007

Petroleum, petrochemical and natural gas industries - Lubrication ..

US ISO 10438-3:2007

Petroleum, petrochemical and natural gas industries - Lubrication ..

US ISO 10438-4:2007

Petroleum, petrochemical and natural gas industries - Lubrication ..

US ISO 10439-1:2015

Petroleum, petrochemical and natural gas industries - Axial and c ..

US ISO 10439-3:2015

Petroleum, chemical and natural gas service industries - Axial an ..

US ISO 13588: 2012

Non-destructive testing of welds - Ultrasonic testing - Use of au ..

US ISO 13623: 2009

Petroleum and natural gas industries - Pipeline transportation sy ..

US ISO 13706:2011

Petroleum, petrochemical and natural gas industries - Air-cooled ..

US ISO 13707:2000

Petroleum and natural gas industries ? Reciprocating compressors

US ISO 13709:2009

Centrifugal pumps for petroleum, petrochemical and natural gas in ..

US ISO 13710: 2004

Petroleum, petrochemical and natural gas industries - Reciprocati ..

US ISO 13847: 2013

Petroleum and natural gas industries - Pipeline transportation sy ..

US ISO 14313:2007

Petroleum and natural gas industries - Pipeline transportation sy ..

US ISO 14732: 2013

Welding personnel - Qualification testing of welding operators an ..

US ISO 15136-1: 2009

Petroleum and natural gas industries -Progressing cavity pump sys ..

US ISO 15136-2: 2006

Petroleum and natural gas industries - Progressing cavity pump sy ..

US ISO 15589-1:2015

Petroleum and natural gas industries - Cathodic protection of pip ..

US ISO 15589-2:2012

Petroleum and natural gas industries - Cathodic protection of pip ..

US ISO 15590-1:2009

Petroleum and natural gas industries - Induction bends, fittings ..

US ISO 15590-2:2003

Petroleum and natural gas industries - Induction bends, fittings ..

US ISO 15590-3:2004

Petroleum and natural gas industries - Induction bends, fittings ..

US ISO 15609-1:2004

Specification and qualification of welding procedures for metalli ..

US ISO 15609-2: 2001

Specification and qualification of welding procedures for metalli ..

US ISO 15609-3: 2004

Specification and qualification of welding procedures for metalli ..

US ISO 15609-4: 2009

Specification and qualification of welding procedures for metalli ..

US ISO 15609-5: 2011

Specification and qualification of welding procedures for metalli ..

US ISO 15609-6: 2013

Specification and qualification of welding procedures for metalli ..

US ISO 16812:2007

Petroleum, petrochemical and natural gas industries - Shell and-t ..

US ISO 17636-1:2013

Non-destructive testing of welds - Radiographic testing - Part 1: ..

US ISO 17636-2:2013

Non-destructive testing of welds - Radiographic testing - Part 2: ..

US ISO 21809-1:2011

Petroleum and natural gas industries - External coatings for buri ..

US ISO 21809-2:2014

Petroleum and natural gas industries - External coatings for buri ..

US ISO 21809-3:2011

Petroleum and natural gas industries - External coatings for buri ..

US ISO 21809-4:2009

Petroleum and natural gas industries - External coatings for buri ..

US ISO 21809-5:2010

Petroleum and natural gas industries - External coatings for buri ..

US ISO 3993: 1984

Liquefied petroleum gas and light hydrocarbons - Determination of ..

US ISO 4512:2007

Petroleum and liquid petroleum products - Equipment for measureme ..

US ISO 4257: 2001

Liquefied petroleum gases - Method of sampling

US ISO 4256:1996

Liquefied petroleum gases - Determination of gauge vapour pressur ..

US ISO 4925:2005

Road vehicles - Specification of non-petroleum-base brake Fluids ..

US ISO 4706:2008

Gas cylinders - Refillable welded steel cylinders - Test pressure ..

US ISO 5145: 2014

Cylinder valve outlets for gases and gas mixtures - Selection and ..

US ISO 7507-1:2003

Petroleum and liquid petroleum products - Calibration of vertical ..

US ISO 7225:2005

Gas cylinders - Precautionary labels

US ISO 7507-2:2005

Petroleum and liquid petroleum products - Calibration of vertical ..

US ISO 7507-3:2006

Petroleum and liquid petroleum products - Calibration of vertical ..

US ISO 7507-4:1995

Petroleum and liquid petroleum products - Calibration of vertical ..

US ISO 7507-5:2000

Petroleum and liquid petroleum products - Calibration of vertical ..

US ISO/TR 7507-6:1997

Petroleum and liquid petroleum products - Calibration of vertical ..

US ISO 7866:2012

Gas cylinders - Refillable seamless aluminium alloy gas cylinders ..

US ISO 8819: 1993

Liquefied petroleum gases - Detection of hydrogen sulfide - Lead ..

US ISO 8973: 1997

Liquefied petroleum gases - Calculation method for density and va ..

US ISO 9809-1: 2010

Gas cylinders - Refillable seamless steel gas cylinders - Design, ..

US ISO 9809-2:2010

Gas cylinders - Refillable seamless steel gas cylinders -Design, ..

US ISO 9809-3:2010

Gas cylinders - Refillable seamless steel gas cylinders - Design, ..

US ISO 9809-4:2014

Gas cylinders - Refillable seamless steel gas cylinders - Design, ..

US ISO 10156: 2010

Gases and gas mixtures - Determination of fire potential and oxid ..

US ISO 10461:2005

Gas cylinders - Seamless aluminium-alloy gas cylinders - Periodic ..

US ISO 10460: 2005

Gas cylinders - Welded carbon-steel gas cylinders - Periodic insp ..

US ISO 11114-2 :2012

Gas cylinders - Compatibility of cylinders and valve materials wi ..

US ISO 11119-1: 2012

Gas cylinders - Refillable composite gas cylinders and tubes - De ..

US ISO 11119-2: 2012

Gas cylinders - Refillable composite gas cylinders and tubes - De ..

US ISO 11119-3: 2013

Gas cylinders- Refillable composite gas cylinders and tubes Part ..

US ISO 11223:2004

Petroleum and liquid petroleum products - Direct static measureme ..

US ISO 11120:1999

Gas cylinders - Refillable seamless steel tubes of water capacity ..

US ISO 11621:1997

Gas cylinders - Procedures for change of gas service

US ISO 13341:2010

Gas cylinders - Fitting of valves to gas cylinders

US ISO 13758:1996

Liquefied petroleum gases - Assessment of the dryness of propane ..

US ISO 14245:2006

Gas cylinders - Specification and testing of LPG cylinder valves ..

US ISO 15403-1:2006

Natural gas - Natural gas for use as a compressed fuel for vehicl ..

US ISO 15169:2003

Petroleum and liquid petroleum products - Determination of volume ..

US 947-1:2011

Handling of petroleum products and their derivatives - Part 1: Si ..

US ISO 7-1:2007

Pipe threads where pressure-tight joints are made on the threads ..

US ISO 844:2007

Rigid cellular plastics - Determination of compression properties

US ISO 845:2006

Cellular plastics and rubbers - Determination of apparent density

US ISO 4590:2002

Rigid cellular plastics - Determination of the volume percentage ..

US ISO 1209-1:2007

Rigid cellular plastics - Determination of flexural properties - ..

US ISO 1209-2:2007

Rigid cellular plastics - Determination of flexural properties - ..

.....
Show Related Standards..